Digital Gauge

Other Application

Height, flatness, and inclination measurements

Assembled part measurement and shim selection

Flatness measurement of compact motors

Thickness and flection measurement of compressor parts

  • The main body’s outer dimension of φ8 mm enables measurements to be made at narrow measuring pitches.
  • The principle of magnetic detection enables consistent measurements even for operations in harsh environment.
  • Measurement can be made immediately after turning ON power. No aging is required.
  • Others

  • Cylinder block flatness measurement
  • Bearing height measurement
  • Toe tester and alignment tester
  • Crimp-on terminal caulking height
  • Threading height
  • Turbine blade shape measurement
  • Camber measurement of diecast chassis parts, etc.
  • Deflection and shape measurement

    Cam shaft run-out and shape measurement

    Motor shaft run-out measurement

    Disk run-out measurement

  • Use of spindle bearings of new construction offers strong durability in radial direction.
  • Real-time measured data output specifications allow measured data to be output digitally.
  • The achieved number of strokes is 60 million, enabling long-time usage (DKS Series).
  • Others

  • Crank shaft journal run-out measurement
  • Drive shaft or propeller shaft run-out measurement
  • Bearing part run-out measurement, etc.
  • Thickness and inner and outer diameter measurements

    Film thickness measurement

    Tapered roller bearing measurement

    Bearing inner diameter measurement

  • Digital measurement system assures full-stroke accuracy and supports multiproduct lines.
  • The principle of magnetic detection enables consistent measurements even for operations in harsh environment.
  • The achieved number of strokes is 60 million, enabling long-time usage (DKS Series).
  • Others

  • CVT belt thickness measurement
  • Metal plate and resin plate thickness measurement
  • Steel ball diameter measurement
  • Measurements on a surface grinding machine
  • Shim thickness measurement
  • Gasket thickness measurement, etc.
  • Displacement and stop position measurement

    Work alignment measurement

    Roller-to-roller gap measurement

    Pressing machine’s or injection molding machine’s stop position measurement

  • The principle of magnetic scale is applied, providing impact resistance.
  • Measurement can be made immediately after turning ON power. No aging is required.
  • Real-time measured data output specifications allow digital gauges to be also used for positioning control applications of full-closed loop.
  • Others

  • Top and bottom dead center control of piston parts
  • Measurement of material strength (such as camber)
  • Measurement of press-fit part’s press-fit amount
  • Coater’s nozzle height measurement, etc.